| By Whitson Gordon How to Completely Anonymize Your BitTorrent Traffic with BTGuard
We've talked about how to boost your BitTorrent privacy before, but those measures aren't quite enough anymore to keep you anonymous, because copyright holders are getting more vigilant at tracking down people who share their content. Heck, you don't even need to be doing anything illegal, either. Maybe you just want to keep Big Brother out of your business and throttling your connection. Either way, if you really want to keep your activity private, your best bet involves routing your BitTorrent connection through an external service. BTGuard is a BT-focused proxy server and encryption service, and it's my service of choice. Below, I'll explain what it does, how it works, and how to set it up to privatize and anonymous your BT traffic. How BTGuard Works
But wait, can't the piracy groups then go to the anonymizer service (BTGuard) and requisition their logs to figure out that you're the one downloading the new Harry Potter? Theoretically, yes, but the reason why we chose BTGuard is because they don't keep logs, so there's no paper trail of activity leading back to you. All the piracy monitors see is BTGuard sharing a file, and all your ISP sees is you connecting to BTGuard—but not what data you're downloading, because it's encrypted. If you subscribe to an ISP that throttles BitTorrent traffic (click here to see the worst offenders), and aren't using an anonymizer service, you have an additional problem. Your ISP can still see what you're doing, and if they detect that you're using BitTorrent—even if you're using it for perfectly legal purposes—they'll throttle your connection so you get unbearably slow speeds. When you encrypt your BitTorrent traffic, your ISP can't see what you're using your connection for. They'll see that you're downloading lots of information, but they won't be able to see that it's BitTorrent traffic, and thus won't throttle your connection. You still have to be careful of going over your ISP's bandwidth cap, however, if that exists. BTGuard offers you both a proxy (to combat spying) and encryption (to combat throttling)—though many torrent clients have encryption built-in as well. Sounds great, right? Now the caveats: First, BTGuard isn't free. At $7/month (as little as $5 if you pay for a year in advance), it isn't very expensive, and we think it's well worth it if you want to torrent anonymously. A law suit settlement, if it comes to that, will cost you at least a couple thousand dollars, which equals a couple decades of BTGuard subscriptions, so keep that in mind, too. The other potential downside is that piping your downloads through another service may decrease your upload and download speeds. How much depends on what torrent you're downloading, who from, and a lot of other factors, but just know that it's a possibility. In my experience, more popular torrents stayed at their top speed of 1.4 MB/s (my bandwidth cap) with a proxy, while other less popular torrents (which flew at 1.4MB/s without a proxy) would fluctuate around 200 or 300 kB/s with BTGuard in place. Again, though, a little longer wait on downloads is well worth the protection you get. Lastly, proxies aren't supported by every client, which means you'll have to use one with more advanced features. uTorrent (for Windows) and Vuze (for Windows, Mac, and Linux) both support proxies, but sadly Mac and Linux favorite Transmission does not. (If you're absolutely stuck with a client that doesn't support proxies, check the end of this article for some alternative solutions to the anonymity problem.) How to Set Up BTGuardBTGuard has a one-click install process, but we're going to show you how to do it the manual way, since it works in any BitTorrent client that supports SOCKS5 Proxy—not just the ones supported by BTGuard's installer. It'll also give you a better sense of what exactly BTGuard does, so if you run into problems, you'll have a better idea of how to fix it. Step One: Sign Up for BTGuardFirst, sign up for an account over at BTGuard.com. It'll just take a minute, and then you can get to configuring your client. Their BitTorrent proxy service costs $6.95 a month, but you can get discounts by buying multiple months at a time (up to a year's service for $59.95). Once you're done, you should receive an email telling you that BTGuard is ready to go. Step Two: Configure Your ClientNext, open up your torrent client of choice and find the proxy settings within its preferences. In uTorrent, for example, this is under Preferences > Connection. Your client may have them in a different place (Google around to find out where), but no matter your client, your settings should look like this:
Step Three: See If It's Working
Step Four (Optional): Enable Encryption
If your client doesn't support encryption, or you want a more powerful encryption behind your torrenting, BTGuard offers an encryption service as well. Just head to their Encryption page, download the software, and install it to C:\BTGUARD (this is very important; don't change the installation directory). Then, start the BTGuard Encryption program (accessible from the Start menu), and open up your BitTorrent client. Change your proxy server from Other AlternativesLastly, while this is our preferred BitTorrent privacy solution, it won't work for everyone. For example, if you're stuck with a specific client that doesn't support proxies, you'll need something different. Here are a few of your other options: A full VPN: If your client doesn't support proxies, you'll want a full VPN service that anonymizes all your traffic, not just BitTorrent. You can use one of these great VPN services to protect your traffic, but it's likely you could still experience speed decreases—though this time, they'll affect all your browsing. If you only use it when torrenting, that's fine, but this isn't good for those that want to seed those torrents afterwards. You should also make sure that the VPN service you choose doesn't keep logs of your activity, because if they do, that defeats the purpose of using them at all. A Seedbox: If you want to contribute back to the community (or if you're on a private tracker that requires you seed to a certain ratio), you'll want to try a seedbox. A seedbox is essentially a dedicated server in another country that does all the torrenting for you, using their very high speed connection. Once a torrent is downloaded, you can then connect to your seedbox via FTP or something similar and download your files from them that way. It's more expensive than a simple proxy (ranging from entry-level boxes at $10 or $20 a month to fast boxes with more storage at $50 or even $100 a month), but it allows you to keep seeding at very high speeds. There are a lot of good seedbox providers. Bytesized and ExtremeSeed come highly recommended, but a bit of searching can probably find you a lot of different options. Shop around and see which one's best for you. Usenet: Your last alternative is totry a new filesharing service entirely, like Usenet. It offers encrypted connections and doesn't connect to peers, so others can't track what you're doing. It doesn't always have the selection that BitTorrent has (depending on what you're downloading), but it offers a ton of other advantages, most notably higher speeds and more privacy. Check out our guide to getting started with Usenet to see if it's right for you. BitTorrent isn't the safe place it once was, and if you're going to use it to share and download files, we highly recommend getting some sort of protection from the services above so you can avoid DCMA notices and throttled speeds.Got any other tips for keeping your file sharing on the down low? Share them with us in the comments. You can contact Whitson Gordon, the author of this post, at whitson@lifehacker.com. You can also find him on Twitter, Facebook, and lurking around our #tips page. 
| November 29th, 2011 Top Stories |
If you're using BitTorrent without taking special measures to hide your activity, it's just a matter of time before your ISP throttles your connection, sends you an ominous letter, or worst case, your ISP gets a subpoena from a lawyer asking for your identity for a file-sharing law suit. Here's how to set up a simple proxy to keep your torrenting safe and anonymous. 
When you download or seed a torrent, you're connecting to a bunch of other people, called a swarm, all of whom—in order to share files—can see your computer's IP address. That's all very handy when you're sharing files with other netizens, but file sharers such as yourself aren't necessarily the only people paying attention. Piracy monitoring groups (often paid for by the entertainment industry either before or after they find violators) also join BitTorrent swarms, but instead of sharing files, they're logging the IP addresses of other people in the swarm—including you—so that they can notify your ISP of your doings. A proxy (like BTGuard) funnels your internet traffic—in this case, just your BitTorrent traffic—through another server, so that the BitTorrent swarm will show an IP address from a server that can't be traced back to you instead of the address that points to your house. That way, those anti-piracy groups can't contact your ISP, and your ISP has no cause to send you a harrowing letter.
You'll also want to make sure you're using the proxy for hostname or tracker lookups as well as peer-to-peer connections, so check all boxes that say anything like that. You'll also want to disable connections or features that could compromise the proxy, so check all the boxes under uTorrent's "Proxy Privacy" section, or anything similar that your client may have. Hit Apply, exit the preferences, and restart your client. Your proxy should now be active.
To ensure that it's working, head over to 
If you want extra security (or if you're trying to protect your connection from being throttled), you'll also want to encrypt all that traffic. Many clients have this feature built-in. In uTorrent, for example, just head to Preferences > BitTorrent and look for the "Protocol Encryption" section. Change your outgoing connection to Forced encryption, and uncheck the "Allow incoming legacy connections" box. From there, you should be good—your ISP shouldn't throttle your connection after this is enabled.
